Milwaukee M18 FORCE LOGIC ONE-KEY Brushless Cordless 60kN Latched Inline Utility Crimper Skin - M18HCCT600C

Milwaukee M18 FORCE LOGIC ONE-KEY Brushless Cordless 60kN Latched Inline Utility Crimper Skin

The Milwaukee M18 FORCE LOGIC 60kN Latched Inline Utility Crimper is the easiest way to make uniform crimps. The inline design and 340° rotating head delivers unmatched access into confined spaces and maximum control in multiple orientations. An enlarged trigger and dual electronic release buttons enable both left and right-handed users to easily activate the tool while wearing gloves without changing hand position. The latched head is easily opened and then secured to ensure that only the intended wire gets crimped. Universal die reception is compatible with most common 60kN U-dies on the market. More space between the die seats enables our users to insert and remove dies while the latch is closed and to easily align on large connectors. Predictive Force Monitoring (PFM) constantly measures output force to ensure full pressure is reached and that the output force is the same over the life of the tool delivering consistently uniform crimps. The crimper also performs a pre-crimp battery check to ensure that the battery has enough charge to complete a full crimp. Equipped with fully enclosed high-speed hydraulics, a POWERSTATE Brushless Motor and REDLINK Electronics. Integrated with Milwaukee’s ONE KEY Technology, the crimper stores real-time crimp. This is a Skin/Tool Only. Batteries & Charger are Not Included.

Included Accessories

• 1 x Blow Mould Case

Features

• Complete crimps in less than 5 seconds with 60kN of force.
• Easy die alignment and linear movement ensure most uniform crimp results.
• Universal die reception is compatible with most common 6 Ton (60kN) U-dies on the market.
• The quick latching head is rotatable by 340° and has an integrated light to illuminate the crimp surface.
• PFM (Predictive Force Monitoring): Automatically ensures optimal pressure for every crimp.
• ONE-KEY enabled for inventory management, tracking and reporting.
• The On-Board Hang Hook / Lanyard Loop enables users to either carry and transport the tool with a lanyard or to tie off the tool for transport on the jobsite.
• The tool Records & Stores Every Crimp Made for Professional Report Building through ONE-KEY.
• Capacity: 300 mm² in Cu / Al

Specifications

Platform	M18 / ONE-KEY
Crimping Force	60kN
Crimp Time (AI/CU)	5 Seconds
Max Crimp Sizes (Al/CU)	300mm²
Jaw / Head Rotation	340°
Predictive Force Monitoring (PFM)	Yes
ONE-KEY Enabled	Yes
Length	438mm
Weight (Tool Only)	3.4kg

Warranty

5 Year Limited Tool Warranty by Milwaukee Australia.